Lennox Hearth CI1500 Manuel d'utilisateur télécharger pdf

Lennox Hearth Products; 1110 West Taft Avenue; Orange, CA 92865 Part #775146M Rev. A, 12/03, Page 1 of 2

INSTALLATION

INSTRUCTIONS

BK-CI BLOWER KIT (CAT. NO. H0767)

FOR MODELS – CI1500 AND CI2500 SERIES

KIT CONTENTS:

1 ea. Blower Assembly

1 ea. Rheostat Assembly

1 ea. Fan Disc with 1 ea. White Wire

5 ea. Screws, #8 x ½”

1 ea. Instruction Sheet

TOOLS REQUIRED:

1/4” & 7/16” Nut Drivers or Sockets

INSTALLATION INSTRUCTIONS:

1. The following instructions, 1 through 11

are for units WITHOUT

an Optional Full

Function Flame Modulating Remote

Control System, H0301 or H0302. If either

of these kits have been purchased, follow

instructions on Page 2 instead – See

INSTALLATION INSTRUCTIONS for units

WITH a Full Function Flame Modulating

Remote Control.

Using a 1/4” nut driver or socket, install

the Blower Assembly, using the 3 screws

provided, to the bottom of the rear

shroud as shown in Figure 1.

2. Disconnect the 2 black wires from the on/off

switch at the valve (from terminals TP/TH

and TH). See Figures 2 & 10.

3. Using a 7/16” nut driver or socket, remove

the 4 bolts on the rear shroud as shown in

Figure 3. Carefully lift off the shroud and

turn it to the side (see Figure 4).

4. Using a ¼” nut driver install the fan disc

with white wire onto the stove back

(install with 2 existing screws as shown

in Figure 4).

5. Pass the white wire from the fan disc

through the hole in the rear shroud and

connect it to the white rheostat wire (as

shown in Figure 5).

Important Note: Ensure that the wires and

connectors are completely through the hole

and contained in the rheostat housing.

6. Locate the long black wire from the

blower assembly and pass the wire

through the hole in the rear shroud. Stow

the wires into the existing wire holders

on the inside of the rear shroud (see

Figure 6a & 6b).

7. Connect the remaining black wire from the

blower to the bottom terminal on disc as

shown in Figure 7.

8. Slide the sleeves on the wires to cover the

connectors on the fan disc as shown in

Figure 8.

ure 1

ure 3

ure 4

ure 2

Remove 2

bolts on

each side of

rear shroud.

Hole

Install disc

with wire

White wire from disc

Long black

wire from

blower

Pass wire

through

hole

Stow wires

into holders

Figure 6a

Figure 6b

Connect the

remaining wire

from the blower

to the fan disc

Slide the sleeves

on wires to cover

connectors

ure 5

ure 8

ure 7

Install blower using 3

screws provided

Shroud

Connect white wires

Disconnect 2

black wires

1 2

Résumé du contenu

Page 1 - INSTRUCTIONS

Lennox Hearth Products; 1110 West Taft Avenue; Orange, CA 92865 Part #775146M Rev. A, 12/03, Page 1 of 2 INSTALLATION INSTRUCTIONS BK-CI

Page 2 - RHEOSTAT

Lennox Hearth Products; 1110 West Taft Avenue; Orange, CA 92865 Part #775146M Rev. A, 12/03, Page 2 of 2 9. Connect the black wire from the blowe

Commentaires sur ces manuels

Pas de commentaire

Lennox Hearth CI1500 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Kits de voiture Lennox Hearth CI1500. Lennox Hearth CI1500 User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels