Lennox-hearth 775202M Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Ventilateurs Lennox-hearth 775202M. Lennox Hearth 775202M User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1
AIR CIRCULATION BLOWER KIT
MODEL VINT-TET BLWR, CAT. NO. 75194
INSTALLATION INSTRUCTIONS FOR AN AIR CIRCULATION
BLOWER KIT FOR USE WITH THE VINTAGE™ 27 GAS STOVE
775202M
Rev. A, 01/2011
LENNOX HEARTH PRODUCTS
KITS AND ACCESSORIES
KIT CONTENTS
1 ea. Blower Assembly (item #1)
2 ea. Washers, #10 (item #2)
2 ea. Nuts, 10-24 Nylock (item #3)
1 ea. Instruction Sheet
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
TURN OFF THE STOVE AND ALLOW IT TO COMPLETELY COOL BEFORE
PROCEEDING.
INSTALLATION INSTRUCTIONS
Step 1. Using an allen wrench, remove socket head screw A that secures the
heat shield to the bottom of the stove. See Figure 2.
Step 2. Using pliers, twist and break off section B of the heat shield (shown
as hatched section B in Figure 2). Discard this piece after removing.
Figure 1 - Kit Contents
Figure 2
TOOLS NEEDED
5/32” Allen Wrench Or T-Handle Wrench
3/8” End Wrench
Pliers
GENERAL INFORMATION
This optional 150-CFM blower for the Vintage gas stove provides variable
speed control, thermal activation and forced air circulation of the warm air
into the room.
If you encounter any problems, need clarification of these instructions or are
not qualified to properly install this kit, contact you local distributor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND OPERA-
TION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO THESE
INSTRUCTIONS.
A
B
Heat Shield
Stove Bottom
Stove Back
A
B
B
1
2
3
2. Remove Section B
and Discard
1. Remove
Screw A
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - KITS AND ACCESSORIES

1AIR CIRCULATION BLOWER KITMODEL VINT-TET BLWR, CAT. NO. 75194INSTALLATION INSTRUCTIONS FOR AN AIR CIRCULATION BLOWER KIT FOR USE WITH THE VINTAGE™ 27

Page 2 - Figure 3 - Mounting Studs

2NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.Step 3. Remove the blower from the box and unwrap it. The blower has a rubber grommeted hole at e

Page 3 - WARNINGS

3NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.Figure 6 - Blower Control KnobVintage™ 27 Blower Wiring DiagramBlower OperationThe blower will co

Page 4 - P/N 775202M REV. A 01/2011

4Printed in U.S.A. © 2010 Lennox Hearth ProductsP/N 775202M REV. A 01/2011Lennox Hearth Products reserves the right to make changes at any time, wi

Commentaires sur ces manuels

Pas de commentaire